D Rig (Print)

STEP 1

A hook with an out-turned eye and fluorocarbon are essential for tying the D rig.

STEP 2

Remove some of the IQ Original Fluorocarbon. Around 12 inches is suffice.

STEP 3

Push the tag end through the eye of a Choddy hook, like so.

STEP 4

Begin to whip the Choddy hook on using a knotless knot.

STEP 5

Once you have whipped down five times, take it back through the front of the eye.

STEP 6

Thread a Micro Rig Ring onto the tag end that would normally be a hair.

STEP 7

Then, place the tag back through the eye of the hook, as shown here.

STEP 8

Carefully burn the tag end with a naked flame. This creates a blob.

STEP 9

The blob prevents the tag end from pulling back through the eye.

STEP 10

Attach a ring swivel by forming a figure-of-eight loop in the opposing end.

STEP 11

Moisten the knot and then slowly pull it tight, like so.

STEP 12

Trim the tag end with a sharp pair of Korda Razorblades.

STEP 13

Anchor your pop-up down with the correct split shot. This is a No1 shot.

STEP 14

Pineapple pop-ups are a fantastic bait for outwitting opportunist carp.

STEP 15

Tie the pop-up onto some dental floss and then attach to the Micro Rig Ring.

STEP 16

The final rig is very invisible and carp find it tricky to get rid of - superb!