Mechano Rig (Print)
First, double over an eight-inch section of Mouth Trap and blob the ends.
This is how the looped section should look, with tags fused together.
Tie an overhand knot in the end of the loop, forming a 1.5in loop.
Trim the two tags below the overhand knot.
Now blob the tags down so they fuse just under the knot.
Now slide a Micro Ring Swivel onto the loop.
Thread on a Thinking Anglers Hook Bead.
Push it down the Mouth Trap Loop.
Thread another Hook Bead onto your size-six Choddy and pass the hook onto the loop, like this.
Pass the loop over the hook point and onto the back of the shank.
Pull the loop down into position, and bend the Mouth Trap, to form a kicker.
Now thread a Hook Ring Swivel and teardrop stop onto the hook, so it looks like this.
Now for the boom section. You'll need a 12-inch section of 25lb IQ.
Tie the IQ to a Hybrid Lead Clip using a figure-of-eight loop.
The result should be a lovely round loop.
Now tie the other end to the Micro Rig Swivel, using the same figure-of-eight loop and cover the knot with putty.