The Big Rig (Print)

STEP 1

These are the bits that you'll need to construct Myles' rig.

STEP 2

Start by pulling off a 8-inch section of Mouth Trap.

STEP 3

Whip on your Choddy hook, using a knotless knot.

STEP 4

Myles uses 12 turns, and ensures that the hair exits straight too!

STEP 5

Setting the link at two inches, pop on a Micro Rig Swivel and fold the Mouth Trap to form the beginning of a loop.

STEP 6

Now tie an overhand loop to trap the swivel at the end of your hook section.

STEP 7

Ease the knot tight with a Pulla Tool. This is how your rig should look now.

STEP 8

Now kick the loop in towards the hook point, in the same plane as the point too.

STEP 9

Form a D-rig, as you would with a normal chod rig, trapping your rig ring in place.

STEP 10

Using a grinner knot, attach 10 inches of N-Trap Soft to the swivel, this will form the boom.

STEP 11

Wrap Dark Matter putty around the knot, to help balance the pop-up.

STEP 12

There you go, the finished rig. Set the boom longer for weedy lakes, shorter for hard lake beds.

STEP 13

STEP 14

STEP 15

STEP 16