Combi Rig (Print)

STEP 1

IQ2 and Supernatural are key components for this rig design.

STEP 2

Create a hair in the soft, Supernatural using an overhand loop and slide on your hook bait.

STEP 3

Whip on a Wide Gape hook using a knotless knot.

STEP 4

Now push 1.5cm of shrink tubing over the eye of the hook, like this.

STEP 5

Shrink the tubing down and set this angle into it as it cools.

STEP 6

Now grab your IQ and bend the end over into a loop, like this.

STEP 7

Thread the braid section through the loop and position it like this, with the tubing close to the loop.

STEP 8

Make six turns around both arms of the loop, whipping away from the hook eye.

STEP 9

Now make two whips back up towards the hook eye, over the previous whips.

STEP 10

Bring the braid back through the loop, the same side as it went in.

STEP 11

Moisten the knot and draw the hook and tag away from the loop, tightening the knot.

STEP 12

Trim both tags, leaving a neat knot.

STEP 13

Cover the knot with a small blob of Dark Matter putty.

STEP 14

This how the hook end of your combi link should look.

STEP 15

Cut the IQ boom 10 inches from the knot and tie on a Link Loop.

STEP 16

That's the combi link sorted. It's an awesome, subtle presentation.