22.05.13

Spring Launch - Part Two

Phase two of our exciting spring launch has landed at Korda HQ, and you’ll be able to lay your hands on it later this week at all good Korda stockists.

Let’s have a look at the new products individually….

Finger Stalls
Our neoprene finger stalls are streamlined, snug and offer unrivalled protection when going for the big cast, especially with braid. They are available in both small and large versions.

Quick Release Lead Clips
These new lead clips have been designed to smoothly eject the lead in snaggy or weedy conditions. The lead-retaining arm is smoothly configured to allow for seamless ejection and features specially engineered grooves that prevent the tail rubber from adhering to the tail of the clip, ensuring a smooth lead drop when you need it most. The clips are of robust construction, so they’ll deal with the most brutal casting with big leads and they’re available in weed/silt and gravel/clay colours.

Tapered Line

Tapered SUBline has all of SUBline’s fast-sinking, abrasion resistant-properties, but the line tapers into an integral shock leader at each end. No knots are necessary; if you snap off and lose one, all you have to do is wind the line onto a new spool to reveal the other!
Because there are no leader knots involved, the risk of ‘frapping up’ on big casts is massively reduced and there is nothing for weed to collect on or for a lead system to jam against.

This line was designed for extreme-range casting, but the extra diameter also acts as a robust snag leader. Each tapering leader is 15 metres long, but can be cut down by a maximum of five metres for super-long range, when every last yard counts.

Tapered SUBline is available in the following versions:

0.28mm - 0.50mm (8lb tapering to 40lb)
0.30mm - 0.50mm (10lb tapering to 40lb)
0.33mm - 0.50mm (12lb tapering to 40lb)

Tapered Leaders

If you prefer a more traditional leader then we now have the answer, in the shape of these SUBline leaders. They’re smooth, supple and taper from a low diameter that’s perfect for knotting to line of similar diameter, right up to the thick shockleader end that’ll take the brunt of the biggest casts.
There are three versions available: 8lb to 40lb, 10lb to 40lb and 12lb to 40lb. Each spool holds five, 12-metre leaders that can be cut down to suit the individual’s needs. Tapered SUBline leaders are available in Sub Brown colour only.

Helicopter Leadcore Leaders

Based around our Kable Leadcore and No-Trace system, these ready-tied leaders are constructed to exacting standards. They’re literally as good as we can tie ourselves, so you can rest assured that they won’t let you down.
The leaders are 1m long and come in two versions, weed/silt and gravel. Of course, being tied from Kable, they feature a clever banded camouflage pattern that’s been designed to break up the outline of the leader when on the bottom.
The No-Trace system offers unrivalled safety, should you crack off or become cut off. If a hooked fish becomes snagged or weeded, then the No-Trace bead can slide off the Chod Sleeve and drop off the leader entirely. This leaves the swivel free to slide up and off the leader, unimpeded by a bead, which could catch on weed that has collected around the leader knot.
You can use the leaders with most types of presentation, including the chod rig.

Get down to your Korda stockist later this week and you'll be able to take a close look at all the new gear for yourself.

News ArchiveNEWS ARCHIVE

ARCHIVE